Introduction
The Huawei EchoLife HG8245C is a GPON ONT (Optical Network Terminal) widely used by FTTH ISPs for fiber internet connections.
This device supports:
GPON fiber connectivity
WAN routing and bridge modes
WiFi broadcasting
VoIP (depending on ISP provisioning)
Advanced network configuration
Older firmware versions (Version 3 UI) provide basic functionality but lack improved interface optimization and certain configuration enhancements available in Version 5.
This article provides a complete step-by-step guide to upgrading the firmware from Version 3 to Version 5 safely and correctly.
⚠️ Important Disclaimer
Firmware upgrade involves risk.
Before proceeding:
Only perform firmware update using Ethernet Lan cable. Don't use Wi-Fi for firmware upgrade.
Ensure you are using the correct firmware file for HG8245C.
Do not interrupt power during upgrade.
Backup configuration if possible.
This guide is for educational and technical purposes only.
📶 About Huawei HG8245C
The Huawei EchoLife HG8245C is a fiber ONT router that integrates:
GPON uplink port
LAN Ethernet ports
WiFi interface
ISP provisioning capability
Firmware upgrades can improve:
UI responsiveness
Feature accessibility
System stability
Security patches
🛠 Firmware Upgrade Process — Step by Step
Below is the exact method used to upgrade from Version 3 to Version 5.
Step 1 — Login to Router Admin Panel
- Open a web browser.
- Enter the router IP address (commonly 192.168.100.1 or 192.168.1.1 depending on ISP).
- Login using:
Username: telecomadmin
Password: admintelecom
After successful login, the router homepage dashboard will appear.
Step 2 — Navigate to Firmware Upgrade Section
- Go to System Tools
- Click on Firmware Upgrade
This will open the firmware upload interface.
Step 3 — Upload the Firmware File
- Click on Browse
- Select the required Version 5 firmware file
- Click Upgrade
The upgrade process will start.
Step 4 — Wait for Firmware Installation
The upgrade process takes approximately:
2 to 3 minutes
In my case, it took around 3 minutes.
⚠️ Do not:
Close the browser
Disconnect power
Interrupt the process
Once completed, a confirmation message will appear.
Step 5 — Restart the Router
After successful upgrade:
A Restart button will appear
Click Restart
Wait approximately 1 minute
The router will reboot automatically.
Step 6 — Access the Updated Version 5 UI
After reboot:
- Refresh the browser
- Login again using:
Username: telecomadmin
Password: admintelecom
You will now see the blue interface, which indicates Version 5 UI.
⚙️ Post-Upgrade Configuration
After upgrading:
Select your required provisioning method
Apply WAN configuration if necessary
Complete ONT authentication process
Once WAN configuration is applied successfully, return to the homepage.
Configuration is now completed.
🎨 What Changed in Version 5?
The Version 5 UI provides:
Blue modern interface
Improved layout structure
Easier navigation
Better feature organization
You can now access all router features with improved usability.
🔍 Technical Observations
During the upgrade:
No firmware corruption occurred
No bootloop issue observed
System stability maintained
Login credentials remained unchanged
Upgrade process was smooth and successful.
🏆 Final Conclusion
Upgrading the Huawei EchoLife HG8245C from Version 3 to Version 5 significantly improves the user interface experience.
The process is straightforward if performed correctly and carefully.
After upgrade:
Router works normally
UI becomes modern
Configuration options remain accessible
If you follow the steps carefully, the firmware upgrade is safe and efficient.
Huawei HG8245C firmware upgrade, HG8245C V3 to V5 update, Huawei ONT firmware guide, Huawei EchoLife HG8245C update tutorial, telecomadmin login HG8245C, Huawei router firmware Nepal, FTTH ONT upgrade guide, Huawei GPON router firmware