Introduction
The Huawei EchoLife HG8245C is a widely used GPON ONT router in FTTH networks. While Version 5 firmware offers a modern blue UI and improved layout, some users prefer the older Version 3 interface for compatibility, stability, or familiarity.
This guide explains how to safely downgrade the firmware from Version 5 back to Version 3.
⚠️ Important Warning Before Downgrading
Firmware downgrade carries risk.
Before proceeding:
Use the exact firmware designed for HG8245C.
Do not power off during downgrade.
Use LAN cable connection (recommended).
Backup configuration if possible.
Downgrading with the wrong firmware can brick the device.
Router Overview
Device: Huawei EchoLife HG8245C
Type: GPON ONT Router
Access Method: Web Interface
Admin Login: telecomadmin
Step-by-Step Downgrade Process (V5 ➝ V3)
Step 1 — Login to Router (Version 5 UI)
- Open browser.
- Enter router IP address (usually 192.168.100.1).
- Login using:
Username: telecomadmin
Password: admintelecom
After login, Version 5 blue interface dashboard will appear.
Step 2 — Navigate to Firmware Upgrade
- Go to Advanced Configuration
- Go to Maintenance Diagnosis
- Click Software Upgrade
This opens the firmware upload page.
Step 3 — Upload Version 3 Firmware
- Click Browse
- Select the required Version 3 firmware file
- Click Upgrade
The downgrade process begins.
Step 4 — Wait for Installation
Downgrade takes approximately: 2 to 3 minutes
During this time:
❌ Do NOT close browser
❌ Do NOT remove power
❌ Do NOT refresh page
Wait patiently until upgrade completes.
Step 5 — Restart the Router
After successful firmware installation:
A Restart button appears
Click Restart
Wait around 1 minute
Router will reboot automatically.
Step 6 — Login to Version 3 Interface
After reboot:
- Refresh browser
- Login again using:
Username: telecomadmin
Password: admintelecom
You will now see the older Version 3 UI interface.
Post-Downgrade Configuration
After rollback:
Select required provisioning method
Apply WAN configuration (if needed)
Complete ONT authentication
Verify internet connectivity
Once done, your router is fully operational in Version 3.
Technical Notes
During testing:
Downgrade completed successfully
No bootloop observed
Credentials remained unchanged
WAN settings required reconfiguration
Always re-check internet and WiFi settings after downgrade.
Final Conclusion
Downgrading the Huawei EchoLife HG8245C from Version 5 to Version 3 is straightforward if done carefully.
If you prefer:
Familiar configuration style
Compatibility with older ISP provisioning
Version 3 may be suitable for your setup.
Always perform firmware operations responsibly.
Huawei HG8245C downgrade, HG8245C V5 to V3 rollback, Huawei firmware downgrade guide, Huawei ONT firmware Nepal, telecomadmin firmware guide, Huawei router rollback tutorial, GPON ONT downgrade method, Huawei HG8245C admin login